Washington seaplane crash that led to 10 deaths was caused by mechanical issue, NTSB says


  • On Sept. 4, 2022, a seaplane crashed into Puget Sound, Washington, in a near-vertical descent and caused 10 deaths.
  • According to the National Transportation Safety Board, the crash was caused by a mechanical issue with the actuator, which controls the plane’s horizontal tail.
  • The disconnected actuator would have made it impossible for the pilot to control the seaplane.

U.S. investigators have confirmed that a mechanical issue caused the seaplane crash that killed 10 people off an island in Washington state last year.

The National Transportation Safety Board, which investigated the Sept. 4, 2022, crash, said Thursday that a single component of a critical flight control system failed, causing an unrecoverable, near-vertical descent into Puget Sound’s Mutiny Bay near Whidbey Island.

About 85% of the aircraft was recovered from the ocean floor several weeks after the crash.

SEATTLE PLANE CRASH: ONE PERSON DEAD, NINE UNACCOUNTED FOR AFTER FLOAT PLANE PLUNGES INTO BAY

NTSB investigators examining the wreckage found that a component called an actuator, which moves the plane’s horizontal tail and controls the airplane’s pitch, had become disconnected. That failure would have made it impossible for the pilot to control the airplane.

Evidence showed the failure happened before the crash, not as a result of it, investigators concluded.

The plane was a de Havilland Canada DHC-3 Otter turboprop operated by Renton-based Friday Harbor Seaplanes. It was headed to the Seattle suburb of Renton from Friday Harbor, a popular tourist destination in the San Juan Islands, when it abruptly fell into Mutiny Bay and sank. The pilot and all nine passengers died.

A U.S. Coast Guard boat and a Kitsap, Washington, County Sheriff boat search an area on Sept. 5, 2022, where a chartered floatplane crashed the day before. (AP Photo/Stephen Brashear, File)

Witnesses said, and video showed, that the plane had been level before climbing slightly and then falling, the NTSB said.

“The Mutiny Bay accident is an incredibly painful reminder that a single point of failure can lead to catastrophe in our skies,” NTSB Chair Jennifer Homendy said in a news release.

Weeks after the crash, the NTSB said the cause appeared to be the disconnected actuator and issued a recommendation that all operators of the DHC-3 planes immediately inspect that part of the flight control system. In early November, the FAA issued an emergency directive to operators mandating the inspections, The Seattle Times reported.

WASHINGTON STATE FLOATPLANE CRASH ON LAKE LEAVES 1 DEAD, ANOTHER PERSON SEVERELY INJURED

The NTSB in its final report recommends that the Federal Aviation Administration and Transport Canada require operators of those planes to install a secondary locking feature, so “this kind of tragedy never happens again,” Homendy said.

Friday Harbor Seaplanes didn’t immediately respond to an email seeking comment on Thursday.

Those who died in the crash include pilot Jason Winters, Sandy Williams of Spokane, Washington; Ross Mickel, his pregnant wife Lauren Hilty and their child Remy Mickel, of Medina, Washington; Joanne Mera of San Diego; Patricia Hicks of Spokane, Washington; Rebecca and Luke Ludwig, of Excelsior, Minnesota; and Gabrielle Hanna of Seattle.

CLICK HERE TO GET THE FOX NEWS APP 

Lawsuits have been filed in King County Superior Court by the family members of the victims against the aircraft’s charter operator, Friday Harbor Seaplanes; as well as the DHC-3 Otter manufacturer, de Havilland Aircraft of Canada; and the plane’s certificate holder, Viking Air — saying they are responsible for the deaths.

Nate Bingham, who is representing the Ludwigs’ families, said the plane crashed because of “an antiquated design with a single point of failure.”

The companies have not responded to requests for comment about the lawsuits. Northwest Seaplanes said last year it was “heartbroken” over the crash and was working with the FAA, NTSB and Coast Guard.



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *